Features:

• A premium, no-sheen, enhancing sealer for stone
• 100% polymer-solid with State-Of-The-Art Polycure™ Technology
• A penetrating sealer formulated to darken, enrich, rejuvenate and highlight the character and beauty of unsealed natural stone.
• May also be used as a pre-grouting sealer
• Low VOC, allows moisture vapour transmission
• Rejuvenates the colour and improves the appearance of worn and weathered stone
• Formulated to provide maximum stain protection and resistance
• Does not alter the slip resistance of sealed surface
• Lasts up to 15 years

Suitable for use: 

Enrich’N’Seal is used as an enhancing sealer for all unsealed natural stone such as marble, granite, slate, limestone, travertine, quartzite. It also effectively seals and darkens the colour of grout joints. Effective for interior and exterior applications

Limitations:

• Do not allow sealer to come in contact with any non-recommended surface as product is not completely removable
• Sealers and finishes should not be used with Enrich ‘N’ Seal
• If Enrich’N’Seal is not wiped completely dry within 5 minutes, a residue may form. If residue occurs, contact Aqua Mix Technical Services for additional options
• Keep floor surfaces dry and clean to reduce possibility of slip-fall accidents. Routine pressure-washing will affect expected wear
• Sealers will not prevent surface wear or etching from acids or caustic chemicals

Cleaning of equipment:

Clean tools with mineral spirits immediately after use