Features:

• Economical, no sheen, water based penetrating / impregnating sealer 
• Provides excellent stain protection
• May be used as a pre-grouting sealer
• Allows moisture vapour transmission
• No-sheen natural look
• Does not alter the slip resistance of sealed surface
• Easy to use
• Water-based, non VOC formula
• Lasts up to 5 years

Suitable for use:

As a natural look sealer perfect for all porous (especially very porous) natural stone surfaces (such as sandstone, slate, marble, limestone, granite, bluestone / basalt) unglazed tiles, porcelain tiles, clay pavers, concrete, brick, masonry, terracotta and grout. For interior and exterior use.

Limitations:

• Do not allow product to come in contact with any non-recommended surface
• If product is allowed to dry on surface, a white film may form. If this occurs, scrub surface with Aqua Mix® NanoScrub® and a white nylon pad
• Sealer will not prevent surface wear or etching from acids or caustic chemicals
• Note: Aqua Mix® Ultra-Solv® or Sealer’s Choice® Gold are recommended in place of Penetrating Sealer in food preparation areas or where maximum stain protection is required

Cleaning of equipment:

Clean tools with mineral spirits after use