HIDE Tile Inlay Covers suit exterior stone thicknesses of up to 42mm; the Linear Drain Covers are compatible with the Everhard Industries EasyDRAIN STANDARD and EasyDRAIN COMPACT external drain channel systems.

• Outdoor drainage for landscaping and pools
• Compatible with 125mm Everhard EasyDRAIN STANDARD or EasyDRAIN COMPACT drains (ED) - channel not included
• Easily removed modular lengths @ 1210mm
• Cover depths to suit 10, 20, 30 and 40mm tile or stone
• Adjustable height & clearances
• Centralising tabs - a world-first in design
• 90º mitred corner kit option
• Inlay with your selected surface finish
• 20-year warranty
• Flexible installation features 

Note: Channel installation as per manufacturer instructions

The channel must be flush with the tile fixing height (slab level), as the HIDE Linear Drain Cover sits above the channel, flush with the top of the tile.

One finishing kit is required per project (Box B)
 

Lid Kit (Box A) contains

• 1 x linear lid
• 5 x linear bridges & levellers
• 2 x adhesive

Finishing Kit (Box B) contains

• 2 x end caps
• 1 x access key
• 1 x stainless steel cutting disk

Corner Kit (Box C, optional) contains

• 1 x left hand mitred corner lid
• 1 x right hand mitred corner lid
• 8 x linear bridges & levellers
• 1 x corner bridge & leveller
• 4 x adhesive

Tile Edge Trim (Box D - optional, listed separately) contains

• 2 x end caps
• 1 x access key
• 1 x stainless steel cutting disk

Linear End Cap Set - (optional) additional end caps if adding to each 1210mm length (set of 2)

NOTE: It is very important that your tile layer understands the installation process of this product and the additional height requirements before fixing the channel drain.

TIP: You will only need one ‘Key Hole’ per multiple channel cover (not every length) as the remaining covers can be lifted once the first length is removed with the key. Also, use the supplied key to bend down the ‘Tabs’, a handy dual-purpose tool.

GETTING TO KNOW THE OPTIONS
HIDE “ED” Covers are compatible with Everhard industries, standard Easy Drain channel or ED Compact drain.

Create your own water channel in the slab, width and depth to support the selected HIDE Bridge and drainage requirements of the project.

Hide standard bridges are in every kit; however, Extended Height Bridges are also available separately in packs of 5, allowing for retrofitting, levelling beds and custom-formed channels.  

The HIDE Bridge is independent of the Cover and the Channel; this allows flexibility or adjustment between the channel and cover height.

All HIDE bridges are adjustable in height:

Cut down the legs in the marked 5mm increments.
Fix the supplied Height levellers or your own ceramic packers between HIDE cover and the bridges for extended height options.

Cover End Caps are a finishing option and are available as an extra to allow modular installation.

Corner Drain layout is made easy with no onsite cutting as it is fully fabricated at the HIDE factory.

The supplied stainless steel cutting disc allows the HIDE Cover to be cut down to match tile size or grout lines.  

Download brochure

Installation Guide