HIDE Skimmer Lids are a kit-based range that provides superior safety, performance and durability. HIDE Skimmer lids are made with a high quality marine grade, 316 stainless steel which guarantees a long life for both your skimmer lid, inlay and surrounds a long life! the Hide Skimmer Lids are 100% pool safety compliant with Australian Standards so you can have complete peace of mind!

Kit Sizes Available:

• Internal 8-11mm - External Measurements: 342mm x 342mm x 23mm Deep
• Internal 12-16mm - External Measurements: 342mm x 342mm x 28mm Deep
• Internal 15-22mm - External Measurements: 342mm x 342mm x 33mm Deep
• Internal 25-32mm - External Measurements: 342mm x 342mm x 43mm Deep
• Internal 35-42mm - External Measurements: 344mm x 342mm x 53mm Deep

Each kit purchased includes the following:

HIDE Safety Key

Ergonomically designed, precision made key constructed from high-strength stainless steel. A tool to enable the installed HIDE lid to be safely and easily removed from its recess, providing access to the contents within.

*DO NOT LEAVE THE SAFTEY KEY IN THE HIDE LID! ALWAYS store the HIDE Safety Key out of reach of children, in a secure, childproof location. Return to safe storage immediately after use.

HIDE Height Adjuster

An acrylic sheet which provides 2mm of extra height. It is only required if the chosen inlay material is too thin to provide a flush finish when fitted inside the inlay lid. Depending on the HIDE product chosen, your kit may contain one or multiple Height Adjusters.

HIDE Inlay Lid

Constructed from marine grade, 316 stainless steel. Fully welded corners to maintain lid rigidity and resist twisting. All internal corners have a minimum radius to allow for close tolerance fitting of inlay materials. The Inlay Lid is fitted with the inlay materials chosen for the landscaping project eg tile, paver, decking, concrete etc. It provides a seamless, flush finish in your landscaped area. It also protects the inlay materials from chipping or breakages when the lid is opened or closed

Hide Edge Protector

Constructed from marine grade, 316 stainless steel. Fully welded corners to ensure strength and a seamless appearance. The key way design is cleverly hidden at the edge of the lid to reduce the visual impact of the keyhole.A frame which sits on the outside of the Inlay Lid. The Edge Protector is designed to protect the coping/surrounds immediately adjacent to the lid. It ensures the surrounds are not chipped or broken when the lid is opened or closed. It also provides for adequate drainage, preventing staining and leaching from water damage

Adhesive

To be inserted into a caulking gun. A specially formulated adhesive for use when assembling the inlay lid. It can be used to glue the inlay tray (and height adjuster, if required) to the inlay materials.