Imer Group Mortar Render Spray Pump Koine 3.1 Single Phase

Imer Koine 3.1 Mortar Spray Pumps is designed to be versatile and easy to use even by the less experienced operator thanks to the proven Easy Start system and interactive display.

Imer Koine 3.1 is equipped with safety protections that immediately stop the electric motors in case of removal of the hopper grid or opening of the mixing chamber.

Suitable for the application of:

Dry premixed bagged materials (Dry mode)

•    Mortars for gluing and smoothing thermal insulation panels
•    Mortars for reinforced concrete / lime-based structural reinforcement
•    Restoring / dehumidifying mortars for masonry walls
•    Binders / mortars for consolidation injections
•    Lime / cement / gypsum-based plasters
•    Lime / cement / gypsum based smoothing compounds
•    Insulating plasters based on polystyrene or cork
•    Cement / anhydride-based self-levelling substrates
•    Mortars to protect structures from heat

Wet materials (Wet mode)

•    Finishing coatings, mineral smoothing compounds with silicates or quartzite
•    Waterproofing products, including fibre-reinforced membranes
•    Smoothing compounds for elastomeric / water-repellent finishes
•    Cementitious mortars for reinforced structural reinforcement
•    Binders / mortars for consolidation injections
•    Mortars for tuck pointing / grouting

Koine 3.1 turns into a pump for ready-to-use smoothing products in paste, injection mortar and tuckpointing, simply by turning a switch on the control panel and adjusting the flow rate of material to your preference.

Specifications:

Power supply:                      230V/50Hz Single Phase
Total installed power:         3.4 kW
Mixer motor power:           2.2 kW
Water Pump power:           .45 kW 
Electric compressor:           0.75 kW – 250 L/min 
Dry mode flow rate:            7-17 l/min*
Wet mode flow rate:           2.3-17 l/min*
Pumping distance served:    25 metres*
Height served:                      15 metres*
Hopper volume:                   75 Litre
Loading height:                    1000mm
Sound level:                          (A) < 76 dB
Dimensions:                         600 x 1060 x 1500mm (WxLxH) 
Total Weight:                       159 Kg 
Warranty:                             12 Months
*theoretical flow rates and distance depends on material and site conditions