Gap filling epoxy paste adhesive for civil engineering use.

Megapoxy PM is specially formulated structural non-sag epoxy filling paste and adhesive. This easy to use two-part epoxy sets after mixing to an extremely durable adhesive ideal for bonding natural stone, concrete, steel, timber, glass and masonary. It is easy to use 1:1 mixing make it suitable for onsite applications.

Uses:

  • Precast concrete articles
  • Concrete Pipes and Tanks
  • Grouting bolts
  • Fibreglass articles
  • Natural stones
  • Concrete floors and stairs
  • Bricks and ceramics
  • Concrete columns
  • Metals
  • In-situ formed concrete

Surface Preparation:

Metals: Should be grit blasted to clean surface. Mechanically abraded and degreased. Wire brushing is not entirely satisfactory and gives minimal adhesion only.

Painted Surfaces: A proprietary brand paint stripper should be used. Concrete - the surface may be either flame cleaned or mechanically abraded.

Processing Data:

Mixing Ratio:1 part resin to 1 part hardener by volume
Mixing: Mix until uniform grey or white
Working Life at 25°C: 45 minutes
Minimum Application temperature: 10°C
Minimum Cure Time: 12 hours at 25°C
Full Cure Time: 4 days at 25°C

SKU MP-PM
Brand Megapoxy
Shipping Weight 0.0111kg

Be The First To Review This Product!

Help other Mortar Mart Trade users shop smarter by writing reviews for products you have purchased.

Write a product review