One component polyurethane sealant/adhesive available in Cartridge 310ml & Sausage 600ml

Use as an elastic adhesive for:  

• Assembling metal framed buildings. 
• Cover plates and coverings. 
• Light-weight construction materials. 
• Acoustic ceiling tiles. 
• Wood, metal or plastic window and door frames. 
• Floor mouldings and door sills. 
• As an elastic joint sealant for: 
• Sealing joints in concrete, epoxy, stone and quarry tiled floors. 
• Sealing joints in roofing and guttering etc. 
• Flexible draught proofing. 
• Containers, water tanks and silos. 
• Excellent pick resistance for application ons in shop fronts, prisons, schools, public amenities and buildings. 
• Bolted lap joints. 
• Sealing penetrations in walls or floors for ducts, piping, etc. 
• Sanitary purposes. 

Advantages:     

• New Sikaflex 11FC will bond to well cleaned old Sikaflex 11FC. 
• Excellent adhesion on all cement-based  materials, brick, ceramics, metals, wood, polyurethane, epoxy, and some polyesters.
• Fast cure rate. 
• High durability. 
• High abrasion resistance and tear strength. 
• Good weathering and water resistance. 
• Non-sag on vertical joints up to 30 mm width. 
• Ready for immediate use, no mixing.
• Non-corrosive.
• Can be painted over with many water, solvent and rubber-based paints (preliminary tests recommended). 
• Certified for use in contact with potable water (AS4020-2005). 

Instructions for Use: Surface Preparation: Clean, sound, dry and free of oil, grease and surface contaminants such as form release agents, curing membranes and hydrophobic water repellents. Throughly remove all loose particles and dust.

Application: 

• Minimum application temperature 5°C.
• For easier use store cartridge at temperature between 10°C and 20°C.
• Break inner seal at extrusion end of cartridge.
• Affix nozzle to cartridge, cut tip to suit joint size.
• Install into a caulking gun
• For adhesive purpose apply in spots or beads on the prepared surface, tapping or pressing the part to be adhered against the substrate.
• The thickness of the bead depends on the surface texture (1mm to 5mm). When sealing is completed, joints may be smoothed with a 20% solution of washing up detergent in water. When masking sides of joints for neatness, remove tape before the sealant cures.
• Always allow sufficient surface exposed to moisture.

Colours: Grey, White, Black, Beige